The installation of a drag link should always be completed by a qualified person.
Hydrosteer rods ends that have been supplied with a drag link would have been pre-greased and do not require re-greasing
The rod ends fitted to draglink tubes have anti-seize applied to threads.
When installing the draglink please ensure safe clearances to all chassis and suspension components are maintained for the full movement of the drag link during operation. The clearances must be checked on both full right and left hand wheel turn angles. Additional checks must be made at full suspension bump and hang or rebound. The tyre must not contact the draglink tube at any time.
When adjusting the length of the draglink ensure the steering gear plungers / poppets and axle lock stops are also correctly set as per manufactures specifications.
When tightening the draglink and rod ends , if supplied , ensure that…
View original post 108 more words
Hydrosteer 